Driving Tips · Traffic signs

A STOP sign and you can't see the road: why you stop twice

At an R-2 “STOP” sign, stop first at the line and then again where you can see the road.

Animation, top view: an orange car stops at the line by a STOP sign, creeps forward and stops a second time where the road is visible, as a motorbike appears from behind a van

You're coming out of a side street onto a junction with an R-2 “STOP” sign. You stop at the line and can't see a thing: on the left a van is parked right up against the junction, on the right there's a solid fence, and you can see about three metres of road.

What to notice

  • Drivers on the main road won't brake just because you can't see.
  • The car behind may hoot, but you still mustn't pull out blind.
  • A motorbike appears from behind the van later than a car would, and is going faster than it looks.
  • A car from the main road may turn into your street and cut the corner, right where your bonnet is.

What to do

  1. Make the first stop at the stop line; if there's no line, stop just before the road you're joining.
  2. If you can't see, don't pull out: creep forward until you can see the road and stop a second time there; that way drivers on the main road will spot you sooner too.
  3. Look left, right and left again, and check the pavement.
  4. Pull out only when nobody will have to brake hard because of you.
Free DGT testRead the tips, then check yourself in the free category B mock examKeep practising with free tests

More tips

All tips